Superuser

Autor Thema: SGI Origin 2000 - Deskside, 4x IP27@300 Mhz, 2GB RAM  (Gelesen 3554 mal)

Offline Tom101

  • Mood Newbie
  • *
  • Beiträge: 26
    • Profil anzeigen
SGI Origin 2000 - Deskside, 4x IP27@300 Mhz, 2GB RAM
« am: 02. November 2015, 00:15:29 »


SGI Origin 2000 ( 2200 ?)  - Deskside


2 Nodeboards mit je 2x IP27@300 Mhz (4x CPU)

2 GB RAM (8x 256 MB, je 4 pro Nodeboard)

~ 550 GB HDD's

müsste Irix 6.5.13 installiert sein oder 6.5.12.

Hab mal noch nen Pixar Renderman (ohne lic) und aqsis, neko_pixie und neko_drqueue + deren Abhängigkeiten installiert aber nicht weiter eingerichtet.

Ansonsten ist nix Besonderes installiert. Ftp mal eingerichtet, telnet läuft, ssh v1.

Kiste läuft problemlos, keine Macken. Eine leichte Schramme in der Front die man vlt. auch rauspoliert bekommt, hat mich nicht weiter gestört.

Die Ecken (Verkleidung) habe ich mit Isoklebeband fixiert weil die gelegentlich runtergefallen sind (Holzboden in dem Zimmer) was mich irgendwann tierisch genervt hat, halten normalerweise auch so.

Hinten rechts die Ecke fehlt (s. auch Rückseitenfoto).

Bissl staubig ist's auch, sieht man ja auf den Fotos.


Bin immer mit "putty" per Nullmodemkabel oder eben mit Crossoverkabel per telnet oder ssh drangegangen.

Ich zieh demnächst um und darum muß das Schätzchen weg..

6x SCSI Disc (5x mit Einschubrahmen):

1x 9 GB System-IBM-DGHS-COMP IEC 950

1x 9 GB (Copy of System disc)-IBM DGHS COMP IEC 950

1x 150 GB-HP-BF1468B26B

1x 9 GB (oracle ?)-IBM-DDYS-T-9170

1x 75 GB-ST173404LC

1x 300 GB-HP-BF30084971


Extras:

extra Fiber Channel Card (siehe hinv Output)

extraSCSI Card (siehe hinv Output)

Nullmodemkabel COM - COM

COM-USB Adapter


Einmal "hinv" als Shortversion:

star 80# hinv

4 300 MHZ IP27 Processors

CPU: MIPS R12000 Processor Chip Revision: 2.3

FPU: MIPS R12010 Floating Point Chip Revision: 2.3

Main memory size: 2048 Mbytes

Instruction cache size: 32 Kbytes

Data cache size: 32 Kbytes

Secondary unified instruction/data cache size: 8 Mbytes

Integral SCSI controller 2: Version Fibre Channel AIC-1160, revision 2

Integral SCSI controller 0: Version QL1040B (rev. 2), single ended

Disk drive: unit 1 on SCSI controller 0

Disk drive: unit 2 on SCSI controller 0

Disk drive: unit 3 on SCSI controller 0

Disk drive: unit 4 on SCSI controller 0

Disk drive: unit 5 on SCSI controller 0

CDROM: unit 6 on SCSI controller 0

Integral SCSI controller 1: Version QL1040B (rev. 2), single ended

Integral SCSI controller 4: Version QL1040B (rev. 2), differential

Integral SCSI controller 6: Version QL1040B (rev. 2), differential

Integral SCSI controller 5: Version QL1040B (rev. 2), differential

Integral SCSI controller 7: Version QL1040B (rev. 2), differential

Integral SCSI controller 3: Version Fibre Channel AIC-1160, revision 2

IOC3 serial port: tty1

IOC3 serial port: tty2

Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2

Origin FIBRE CHANNEL board, module 1 slot 8: Revision 4

Origin BASEIO board, module 1 slot 1: Revision 3

Origin MSCSI board, module 1 slot 5: Revision 4

IOC3 external interrupts: 1


Und hier nochmal für die die es ganz genau wissen wollen:

star 5# hinv -vv

4 300 MHZ IP27 Processors

CPU: MIPS R12000 Processor Chip Revision: 2.3

FPU: MIPS R12010 Floating Point Chip Revision: 2.3

Location: /hw/module/1/slot/n1/node/cpubus/0/a

CPU 0 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)

Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa

Location: /hw/module/1/slot/n1/node/cpubus/0/b

CPU 1 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)

Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa

Location: /hw/module/1/slot/n2/node/cpubus/0/a

CPU 2 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)

Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa

Location: /hw/module/1/slot/n2/node/cpubus/0/b

CPU 3 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)

Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa

Main memory size: 2048 Mbytes

Instruction cache size: 32 Kbytes

Data cache size: 32 Kbytes

Secondary unified instruction/data cache size: 8 Mbytes

Location: /hw/module/1/slot/n1/node/memory

Memory at Module 1/Slot 1: 1024 MB (enabled)

Bank 0 contains 256 MB (Standard) DIMMS (enabled)

Bank 1 contains 256 MB (Standard) DIMMS (enabled)

Bank 2 contains 256 MB (Standard) DIMMS (enabled)

Bank 3 contains 256 MB (Standard) DIMMS (enabled)

Location: /hw/module/1/slot/n2/node/memory

Memory at Module 1/Slot 2: 1024 MB (enabled)

Bank 0 contains 256 MB (Standard) DIMMS (enabled)

Bank 1 contains 256 MB (Standard) DIMMS (enabled)

Bank 2 contains 256 MB (Standard) DIMMS (enabled)

Bank 3 contains 256 MB (Standard) DIMMS (enabled)

Integral SCSI controller 2: Version Fibre Channel AIC-1160, revision 2

Integral SCSI controller 0: Version QL1040B (rev. 2), single ended

Disk drive: unit 1 on SCSI controller 0 (unit 1)

Disk drive: unit 2 on SCSI controller 0 (unit 2)

Disk drive: unit 3 on SCSI controller 0 (unit 3)

Disk drive: unit 4 on SCSI controller 0 (unit 4)

Disk drive: unit 5 on SCSI controller 0 (unit 5)

CDROM: unit 6 on SCSI controller 0

Integral SCSI controller 1: Version QL1040B (rev. 2), single ended

Integral SCSI controller 4: Version QL1040B (rev. 2), differential

Integral SCSI controller 6: Version QL1040B (rev. 2), differential

Integral SCSI controller 5: Version QL1040B (rev. 2), differential

Integral SCSI controller 7: Version QL1040B (rev. 2), differential

Integral SCSI controller 3: Version Fibre Channel AIC-1160, revision 2

IOC3 serial port: tty1

IOC3 serial port: tty2

Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2

Origin FIBRE CHANNEL board, module 1 slot 8: Revision 4

PCI Adapter ID (vendor 36868, device 4448) pci slot 0

PCI Adapter ID (vendor 36868, device 4448) pci slot 1

Origin BASEIO board, module 1 slot 1: Revision 3

PCI Adapter ID (vendor 4265, device 3) pci slot 2

PCI Adapter ID (vendor 4215, device 4128) pci slot 0

PCI Adapter ID (vendor 4215, device 4128) pci slot 1

Origin MSCSI board, module 1 slot 5: Revision 4

PCI Adapter ID (vendor 4215, device 4128) pci slot 0

PCI Adapter ID (vendor 4215, device 4128) pci slot 1

PCI Adapter ID (vendor 4215, device 4128) pci slot 2

PCI Adapter ID (vendor 4215, device 4128) pci slot 3

IOC3 external interrupts: 1

Location: /hw/module/1/slot/n1/node/hub

HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)

Location: /hw/module/1/slot/n2/node/hub

HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)

Location: /hw/module/1/slot/n1/node/prom

IP27prom in Module 1/Slot n1: Revision 6.69

Location: /hw/module/1/slot/n2/node/prom

IP27prom in Module 1/Slot n2: Revision 6.69

Location: /hw/module/1/slot/io1/baseio

IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.69


Privatverkauf. Am Liebsten Abholung in Trier-City, Versand nur wenn der Käufer ihn organisiert (und natürlich auch bezahlt :-) )





mood-indigo.org - Das unabhängige Silicon Graphics User Forum

SGI Origin 2000 - Deskside, 4x IP27@300 Mhz, 2GB RAM
« am: 02. November 2015, 00:15:29 »